Although the decorative effect of stainless steel decorative plate is good, since it is decorative, it is hard to avoid being touched and scratched frequently. if it is not maintained, it will be oxidized after a long time and the service life will be shortened, so the maintenance method is very important.  The following describes some treatment methods of surface contamination of stainless steel decorative plates.

First, avoid using washing liquid, steel wire balls, grinding tools and the like containing bleaching ingredients and abrasives. in order to avoid residual washing liquid and corrosion of stainless steel surfaces, clean water should be used to wash the surfaces at the end of washing.

 Second, the surface of stainless steel is covered with dust and dirt which can be easily removed, and it can be cleaned with neutral detergent, such as scrubbing with alcohol or organic solvent.

 Third, the grease and lubricating oil on the surface of stainless steel are polluted. after being wiped clean with soft cloth, they are cleaned with neutral detergent or special detergent.

 Fourthly, the stainless steel surface has bleaching agent and various acids attached. immediately after washing with water, it is soaked and washed with ammonia solution or carbonated water solution, and then washed with neutral detergent or warm water.

 Fifthly, there are rainbow lines on the surface of stainless steel, which are caused by excessive use of detergent or oil, and can be washed away with warm water or neutral detergent when washing. finally, special attention should be paid to never wipe the surface of stainless steel with relatively sharp or rough objects, such as cleaning balls, so that it is easy to scratch the surface of stainless steel and affect its beauty.

 Colors can be divided into: titanium black ( black titanium ), sky blue, titanium, coffee, tea, purplish red, bronze, rose gold, titanium white, green, green, champagne gold, bronze, pink, Japanese gold and colorful.

 Surface technology division is divided into:

 A. electroplating di angle nd [ electro plate;  Galvan iztion ] electroplating: a process of attaching a layer of metal film to the surface of a metal or other material by electrolysis.  Can play a role in preventing corrosion, improving abrasion resistance, conductivity, reflectivity, improving aesthetics and the like.  　

 B, the water plating in the aqueous solution does not rely on external power supply, but relies on the reducing agent in the plating solution to carry out chemical reduction reaction, so that metal ions are continuously reduced on the autocatalytic surface, thus forming a metal plating layer.  　

 C, fluorocarbon paint refers to the coating with fluororesin as the main film-forming substance;  Also known as fluorocarbon paint, fluorine paint and fluorine resin paint.  　

 D, spray paint with compressed air to spray paint on stainless steel plate to form different colors.